YH-S3TDS Organophilic Clay

by QeNAeeH0crZx
All QeNAeeH0crZx's Groups

1 Members 0 Comments
0 Presentations

http://www.organophilic-clay.com YH-S3 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low, medium and high polarity.1. Advantages:☆ High gelling efficiency over low,medium and high polarity organic liquids.☆ Easy of incorporation.No need for polar activator or making pregel.☆ Consistent in rheology and thixotropy development.☆ Easy of dispersion especially in styrene and alcohol solvent. Dust-free addition.☆ Good anti-sagging property and anti-sediment property.☆ Can replace fumed silica in epoxy resin systems and unsaturated resin systems with better thixotropy performance and more economical price.2.Typical Properties: ColorAppearanceDensityMoisture      (@105℃,2hrs)Fineness through 200 meshLoss on Ignition      ( @1000℃ )YellowFree Flowing Powder1.6g/cm3≤4.0%≥95%≤53%3.Typical Applications:●Anti-corrosion paint●Polyester paint●Industrial paint●Solvent epoxy paint●Non-solvent epoxy paint●Adhesive●Putties and sealant●Varnish4.Incorporations:YH-S3 belongs to the unconventional type of organoclays group, being an easy-to-disperse, self-activated organoclay, YH-S3 does not require a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.However, in systems like styrene, xylene,200#solvent oil and compund solvent, pre-gel method is also acceptable.5.Recommended Levels:The amount of YH-S3 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-0.6% based on the total formulation weight. For special purpose, for example, in hand layup unsaturated resin,1-6% is recommended.6.International Countertype:  Garamite®1958

Join Group

There are no posts in this group.