1929 Ford AA Van The design of the base is drawn out (First quality Beech is used for all of this project)

Holes are drilled for the axle pegs 1929 Ford AA Van

1929 Ford AA Van Test fit of the wheels

1929 Ford AA Van Base being cut out using the scrollsaw

1929 Ford AA Van Completed base shown next to the plan detail

1929 Ford AA Van Test fitting of wheels to base

1929 Ford AA Van Van side panels were cut out on the scrollsaw

1929 Ford AA Van Bulkhead cut out and being test fitted to side panels

1929 Ford AA Van The rear panel has been cut out and is being test fitted to side panels

1929 Ford AA Van Marking out the fenders (wings) as shown on plan

1929 Ford AA Van Showing both fenders against the plan

1929 Ford AA Van Cutting out rough shape of wings using the bandsaw

1929 Ford AA Van Cutting out rough shape of wings using the bandsaw – one done & one to go!

1929 Ford AA Van Test fit of wings/running boards

1929 Ford AA Van Cut out rough shape of engine on the plan

1929 Ford AA Van The sanded wings being test fitted to engine

1929 Ford AA Van Test fitting of all components prior to glueing

1929 Ford AA Van The sanded engine block with radiator glued to it

1929 Ford AA Van The front and rear bumpers

1929 Ford AA Van Test fitting the front bumper

1929 Ford AA Van The sides and centre panel are glued to the base

1929 Ford AA Van Followed by the seat base

1929 Ford AA Van The completed seat is now glued into position

1929 Ford AA Van The engine & radiator are glued into position followed by the bulkhead

1929 Ford AA Van The rear panel being glued into place

1929 Ford AA Van Followed by the rear bumper

1929 Ford AA Van As well as the front bumper

1929 Ford AA Van The steering column and gear lever are glued in

1929 Ford AA Van The driver side wing (with headlight) being glued on

1929 Ford AA Van Followed by the passenger side

1929 Ford AA Van A template is glued to piece of wood for the roof prior to cutting out

1929 Ford AA Van Test fitting the roof

Then the roof is glued into place 1929 Ford AA Van

The spare wheel is test fitted 1929 Ford AA Van

1929 Ford AA Van Rubbing strips are fixed to each side panel

1929 Ford AA Van First coat of Danish Oil has been applied to model

1929 Ford AA Van All five wheels after one coat of Danish Oil

1929 Ford AA Van Finished model after three coats of Danish Oil

1929 Ford AA Van Finished model after three coats of Danish Oil

1929 Ford AA Van Finished model after three coats of Danish Oil

1929 Ford AA Van Finished model after three coats of Danish Oil